Z axis problem

Post Reply
Tiefes
Posts: 2
Joined: Sun Sep 02, 2018 2:18 am

Z axis problem

Post by Tiefes » Sun Sep 02, 2018 2:26 am

When I drive with the z axis it moves instead of (0.1 mm to 1mm ) (1mm to 10mm) what can I do , pls help me

Sorry for my bad english :lol:
Top
Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: Z axis problem

Post by Gingko » Mon Sep 03, 2018 6:35 pm

The Z step seems not correct, it goes up too much as it should.
If you have T8 rode, try to calibrate the proper Z step/mm.
http://geeetech.com/forum/viewtopic.php?f=82&t=60931
Point No.7.
Top
Post Reply

Return to “Geeetech I3 Pro W”