extruder doesn't worl

Post Reply
Lukasclv
Posts: 1
Joined: Sat Nov 21, 2015 7:08 pm

extruder doesn't worl

Post by Lukasclv » Sun Jul 08, 2018 5:19 am

Hello,
I have got the following problem:
The extruder motor doesn't work. I tried the motor with cable on the output of the y-axis and it worked. I changed stepper driver with a driver of another output and the stepper is okay, too. Every other motor works. Yesterday everything was okay, then I changed the power supply and now I have got this problem..
Does anyone know this issue or can help? :roll:
Thanks for help.

Lukas
Top
User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:
Contact _kaktus_

Re: extruder doesn't worl

Post by _kaktus_ » Mon Jul 09, 2018 11:17 am

Hi
:mrgreen:
Sometimes it happens that some connector does not contact properly.
It may also happen that the cable slides out of the plug.
When you connect everything the second time, it works.
That is why it is always necessary to do it precisely and accurately.
And it is always worth checking at least visually the quality of the connection.
;)
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Top
User avatar
Admin
Posts: 486
Joined: Wed Nov 30, 2011 9:49 am

Re: extruder doesn't worl

Post by Admin » Mon Jul 09, 2018 1:57 pm

1.You need to check the wiring
2.Check the solder joints of the PCB backplane
Top
misken
Posts: 1
Joined: Mon Jul 09, 2018 3:58 pm

Re: extruder doesn't worl

Post by misken » Mon Jul 09, 2018 4:01 pm

Did you heat up your nozzle? Otherwise it won't turn.. (at least in all my Marlin configurations, I don't know yours).
Top
Post Reply

Return to “Geeetech I3 Pro B”