y axis moves the wrong way

[huckfin]

hi Guys
just built my i3 pro B printer with no problems just a blown fauilty power supply. on trying to home the axis the y axis is going the wrong way.
after reading about this problem am i correct in saying i need to change it in the firmware. i have installed easyprint as this looked the easy way to upload new firmware, being built into the software. i tried to up load the latest version 1.0.04 from 1.0.03 installed just to see if it made a difference.
nothing happened? so 3 questions really am i on the right route to reverse the drive, what do i need to change and why has it not up graded the firmware anyway

[Gingko]

You can refer to this:
viewtopic.php?f=17&t=17037

Try to edit the firmware and upload it with Arduino.
Sometimes you need to try twice because you don't know it is true or false in the first place.

Code: Select all

#define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false