Hi,
I've just bought and built a Pro B. Everything looks to be moving fine but the quality of the print is really poor. We've had access to an Ultimaker FDM printer but we also have a Formlabs SLA printer. I wanted something cheap and simple to knock out rough prototypes. I'm printing using PLA. Does anyone have some basic settings that they could share from extrusion temperature, bed temperature, speed, layers, infill etc.
I've tried changing one thing at a time but it is proving timely and I really wanted to demonstrate that you could get something very cheap that can deliver a good print quality.
Thanks
Mike
Pro B newbie
Re: Pro B newbie
Could you upload your printing setting and the printing object?
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Pro B newbie
[quote] the quality of the print is really poor[/quote] You need to say what this means, it's too general a statement to help understand your problem.
Try checking the Print quality Troubleshooting page here:
https://www.simplify3d.com/support/prin ... eshooting/
Provided you've calibrated and levelled the printer, the clever bit is all in the Slicing software.
You can check out Geeetech's Tutorials here:
http://www.geeetech.com/wiki/index.php/Tutorials
If you're using Slic3r, the User manual is here:
http://manual.slic3r.org/
Play Bonny!
Soadyheid.
Try checking the Print quality Troubleshooting page here:
https://www.simplify3d.com/support/prin ... eshooting/
Provided you've calibrated and levelled the printer, the clever bit is all in the Slicing software.
You can check out Geeetech's Tutorials here:
http://www.geeetech.com/wiki/index.php/Tutorials
If you're using Slic3r, the User manual is here:
http://manual.slic3r.org/
Play Bonny!
Soadyheid.