X Direction Reversed

Post Reply
ChinookTx
Posts: 1
Joined: Sun Jul 10, 2016 4:54 am

X Direction Reversed

Post by ChinookTx » Sun Jul 10, 2016 4:57 am

I have finished building my Geeetech I3 Pro B and my X Axis is reversed.

I have the GT2560 board. Can I fix this through the LCD or an Mxxx command or do I need a new firmware?

Thanks!
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: X Direction Reversed

Post by William » Mon Jul 11, 2016 1:53 pm

ChinookTx wrote:I have finished building my Geeetech I3 Pro B and my X Axis is reversed.

I have the GT2560 board. Can I fix this through the LCD or an Mxxx command or do I need a new firmware?

Thanks!
Hi,
You can only fix it by changing the codes in the firmware,refer to this link:
http://www.geeetech.com/forum/viewtopic ... 17&t=17037
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
palad0n
Posts: 10
Joined: Wed Jul 13, 2016 12:50 pm

Re: X Direction Reversed

Post by palad0n » Wed Jul 13, 2016 12:58 pm

Changing the firmware codes is not the only solution. Gently removing the wires from the connector and reversing the pole positions works as well. Standard wiring order on the motor is Blue, Space, Green, Red, Space and Black. Change this to Black, Space, Red, Green, Space and Blue.
Top
Post Reply

Return to “Products FAQ”