Cannot put the M3 X30 screw through the Y bearing holder

Post Reply
peter
Posts: 4
Joined: Fri Jul 17, 2015 12:53 am

Cannot put the M3 X30 screw through the Y bearing holder

Post by peter » Fri Jul 17, 2015 1:03 am

I bought the Geeetech Arcylic I3 Pro B recently through ebay, when I assemble it and found that M3 X30 screw (bag No. 28) cannot be put through the Y bearing holder at the "Assemble the X-axis smooth rod and the X-axis ends". The screw only has half length with thread. I cannot do any further. Please make correction immediately.
Top
Sherry
Posts: 362
Joined: Wed Jul 01, 2015 12:52 pm

Re: Cannot put the M3 X30 screw through the Y bearing holder

Post by Sherry » Fri Jul 17, 2015 8:44 am

hi,you could use screw M3x35v to assemble.it will help you solve the problem.
Top
Post Reply

Return to “Assembly”