PWM fan not working

[TomPrusaI3aPro]

My PWM fan also isn't working.
I've measured voltage according to the picture in the topic start.
Fan speed 0 :
Pin 1-3 = 0
pin 1-2 = 0
Pin 2-3 = 0

Fan speed 255:
Pin 1-3 =0
Pin 1-2 =0
Pin 2-3 =1.7V

Is the mosfet broken or is something else wrong?
(I've got the 3 in 1 control box )

[TomPrusaI3aPro]

I've got a misfunctioning PWM too..

I've measured the voltages:
Fan speed setting 0 :
Pin 1-2 = 0
Pin 2-3 = 0
Pin 3-1 = 0

Fan speed setting 255:
Same as above but pin 2-3 gives a 1.7V difference.

IS the mosfet broken or is there another problem?
I've got the 3 in 1 control box

[TomPrusaI3aPro]

Sorry for the double post. I though something went wrong, but seems it has to be checked by moderators before it is placed online.

[William]

I think the part of Q4 and Q5 part of the mainboard were broken.
Q4:AP2305AGN
Q5:AP2306AGN

[TomPrusaI3aPro]

William,
I thought Q4 was related to the extruder and not the PWM fan.

How can i check Q4?

[William]

You can refer to this post,test Q5 part
viewtopic.php?f=24&t=17886

[TomPrusaI3aPro]

William,

The link mentions Q5. And not Q4.
You stated that Q5 and Q4 would be broken.

How can i check Q4?