Using the 2-in-1out hotend with a G2s Pro

[myattorneyusa]

Thank you Mark for reply, you got it right! "G2S extruder2 drives axial motors when printing". The solution linkhttp://www.geeetech.com/forum/viewtopic ... 13&t=17064 you suggested, did work for double hotend (two thermo sensors and two heating elements). It's complicated with Delta 3D printer and mixing hotend (one thermo sensor and one heating element with 2 or 3 extruders).

G2S 2in 1 hotend mount

2in1 G2S.JPG (202.84 KiB) Viewed 7759 times

E0 Printing single color

G2S fan and 2in 1 hotend

2in1 hotend.JPG (264.2 KiB) Viewed 7759 times

BTW, sometimes i can see in the system log something like "E1, communication error, system resetting"

[Mark]

glad it worked haha. but the communication thing you said, never seen it before...

[myattorneyusa]

2in 1 mount 4 G2S 3D printer

IMG_3426.JPG (89.7 KiB) Viewed 7748 times

"E1, communication error, system resetting" It's gone after upgrading to new firmware.

2in 1 hotend mount

IMG_3425.JPG (98.31 KiB) Viewed 7748 times

Another thing, don't change axes "reverse true/false" in configuration.h, use defaults or Delta 3D printer will malfunction.

G2S 2in 1 hotend mount

IMG_3424.JPG (100.11 KiB) Viewed 7748 times

Thank you Mark!