Post
by wejo » Mon May 27, 2019 7:48 pm
Hello,
Thanks for the quick reply! I probably did not express myself correctly. The supply of the filament PLA is not the problem, but the movement of the extruder on the X (?) Axis (left and right). This loud chatter at the beginning and end of the printing process is at every printing. I use Cura 4.0 and Repetier-Host. Both have the same process at the beginning and the end. The extruder head stands at the beginning of the printing process for a few seconds and it rattles horribly loud. Then the 3D printing starts normally. At the end of the printing process, the extruder returns to its normal position and rattles for a few seconds until the process stops. It sounds like the transport wheel for the extruder continues to rotate and the conveyor belt of the extruder head is fixed (X-axis?). I print on the SD card. The noise was already in the 3D printing of the dog, on the SD card that came with the purchase of the printer.
Or is this rattle normal at the beginning and end of the printing process?
Excuse me, but I am a total newbie and sometimes I miss the right words. Still in English. I live in Germany, Rothenburg and my english is bad. That's how Google has to help me.
Yours sincerely
Werner
