Heating Bed only reaches 83°C

Post Reply
User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:
Contact _kaktus_

Re: Heating Bed only reaches 83°C

Post by _kaktus_ » Fri Apr 26, 2019 11:32 pm

Hi.
:mrgreen:

According to the description in the picture, in order to connect the 24V power supply, the pads 1 and 2 must be separated.
The voltage is connected to pads 2 - 3.

Is your printer connected to H-B in this way :?:
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Top
ChrisH90
Posts: 32
Joined: Fri Apr 05, 2019 1:18 am

Re: Heating Bed only reaches 83°C

Post by ChrisH90 » Sat Apr 27, 2019 3:49 am

Yes, both heat beds are connected like this. Pad 1 is free, Pad 2&3 are connected.
Top
User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:
Contact _kaktus_

Re: Heating Bed only reaches 83°C

Post by _kaktus_ » Sun Apr 28, 2019 3:34 am

;)

Do you have the possibility to test the hotplate on another power supply :?:
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Top
Post Reply

Return to “Geeetech A30 Series”