The size of the nozzle
-
szymko0703
- Posts: 3
- Joined: Fri Apr 19, 2019 10:46 pm
The size of the nozzle
I need to replace the nozzle, what is the thread in the i3 pro?
Re: The size of the nozzle
Standard Mk8
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: The size of the nozzle
Hi szymko0703,
The 'Standard' thread for a Mk 8 extruder is M6.
What do you have in your i3 Pro B ???
William tends to be vague about this...
If your extruder has 0.3 printed on the front label, does that mean you have a 0.3mm nozzle ?
If you're trying to work it out, you'll no doubt have old melted filament covering any markings on the nozzle, so you can't actually read it...
The 'Standard' thread for a Mk 8 extruder is M6.
What do you have in your i3 Pro B ???
William tends to be vague about this...
If your extruder has 0.3 printed on the front label, does that mean you have a 0.3mm nozzle ?
If you're trying to work it out, you'll no doubt have old melted filament covering any markings on the nozzle, so you can't actually read it...