3D Touch sensor Installation
-
blue.knight@comcast.net
- Posts: 9
- Joined: Sat Feb 23, 2019 9:43 pm
3D Touch sensor Installation
Do you have any pictures that show how the 3D Touch sensor is to be connected on the new A30? I have been fighting trying to get auto-levelnig working for a couple of months now - and STILL no luck!
Re: 3D Touch sensor Installation
Could you give us more details of it?
The hardware version+ firmware version.
You can check the extension board and take photos of it. Maybe it has broken.
The hardware version+ firmware version.
You can check the extension board and take photos of it. Maybe it has broken.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-
essex_chris
- Posts: 11
- Joined: Tue Apr 09, 2019 11:19 pm
Re: 3D Touch sensor Installation
As per https://www.geeetech.com/forum/viewtopi ... 20&t=60676
So now i am looking at getting this installed - my about screen looks like this
I have my soldering iron and solder at the ready - what's next?
Appreciate any help given thanks
This is my bundle of parts now that i have taken off the "printhead"First, you need to check if the "Extruder extension board" is standard.
You need to weld these 5 pins.
So now i am looking at getting this installed - my about screen looks like this
I have my soldering iron and solder at the ready - what's next?
Appreciate any help given thanks