I can't start printing!!

[sss]

I assembled the geetech a10 printer. Then when I turned it on, I couldn't do as Step 4 of the Quick Start Guide's printing process.
When I turned it on, the LCD panel showed only this screen.
Is there a way to initialize the firmware or upgrade to version 1.1.9? What should I do? HELP ME!! (sorry for my bad eng. I am korean..)

[schlulou]

Just to make sure, you pushed the knob to bring up the menu and selected homing?

[sss]

Just to make sure, you pushed the knob to bring up the menu and selected homing?

NO! When the firmware was first starting, I didn't operate the knob. Homing was skipped, and I only saw x,y,z...and others..

[Alxo]

Give the knob a gently push and you will see the menu, select prepare and then auto-home

[sss]

Give the knob a gently push and you will see the menu, select prepare and then auto-home

Well, holding and turning the knob does not make the menu selection on the panel.

[sss]

the instructions are not very good its telling you to click the knob go to the menu in to motion where the options it lists are.

sorry for you, I don't know how to update the firmware. I couldn't find the website that give me detailed instructions.

[Alxo]

Give the knob a gently push and you will see the menu, select prepare and then auto-home

Well, holding and turning the knob does not make the menu selection on the panel.

Hold? It is a push, just as a regular button

[sss]

Give the knob a gently push and you will see the menu, select prepare and then auto-home

Well, holding and turning the knob does not make the menu selection on the panel.

Hold? It is a push, just as a regular button

Oh yeah, pressing the knob works. But I can't choose the menu even if I turn the knob.

[William]

Try to remove the LCD button.
Then you control the metal knob

[sss]

Try to remove the LCD button.
Then you control the metal knob

It doesn't work .. In fact, I once dropped an LCD display on the floor. Can it cause trouble?