Difficult to connect the cable to LCD display board
Difficult to connect the cable to LCD display board
The flat cable with 40 pins is so thin that I can not connect to the LCD display board. I tried many times but the cable would not stick. Anyone could help to show me how to do this.
Re: Difficult to connect the cable to LCD display board
I use a tape and form to push the cable against the slot. The light is now on on LCD but no text or anything, just green light. Please let me know what I did wrong.
Re: Difficult to connect the cable to LCD display board
Hello.
The FFC connector has a snap-flap flap on the hinge.
This is the black element.
Pick it up slightly to jump up.
Slide the flat FFC cable evenly into place. Close the flap.
If you fail to insert the cable correctly into the display socket, the display will not function properly.
Example picture.
.
The FFC connector has a snap-flap flap on the hinge.
This is the black element.
Pick it up slightly to jump up.
Slide the flat FFC cable evenly into place. Close the flap.
If you fail to insert the cable correctly into the display socket, the display will not function properly.
Example picture.
.
- złącze_FFC_40pin.png (544.51 KiB) Viewed 5988 times
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Re: Difficult to connect the cable to LCD display board
This picture does not look like the one on the new model A10M. The connector is really small. No flap.
Re: Difficult to connect the cable to LCD display board
Hi.
Can you take a good quality photo of this connector
Can you take a good quality photo of this connector
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Re: Difficult to connect the cable to LCD display board
While kaktus is correct. You need to attach it then others can check it.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!