A30 automatically pausing
Re: A30 automatically pausing
Mine keeps pausing with the original SD card that was supplied with the printer. I have done no firmware updates and slice with Cura 3.6.0.
Re: A30 automatically pausing
Same there. Printer is 3 weeks old. Latest Firmware from official site uploaded - v1.38.59 (it was nightmare to get it working 
...). A30 Hardware version 3.40. Slicer - Cura 3.6. Tested probable 10 different SD cards (all works perfectly with mine PrintrBot). Same result - random pause on all prints longer than 3 hours. I'm printing with ABS - "resume" is not an option with this material. I switched off filament run out sensor. This not helped. Any ideas what to try?
P.S. U use "Marlin" style G-Code in Cura. Maybe this is reason? Which style Geeetech suggests to use?
...). A30 Hardware version 3.40. Slicer - Cura 3.6. Tested probable 10 different SD cards (all works perfectly with mine PrintrBot). Same result - random pause on all prints longer than 3 hours. I'm printing with ABS - "resume" is not an option with this material. I switched off filament run out sensor. This not helped. Any ideas what to try?P.S. U use "Marlin" style G-Code in Cura. Maybe this is reason? Which style Geeetech suggests to use?
Re: A30 automatically pausing
update... With v1.38.59 it pause almost every print now...
Re: A30 automatically pausing
You should check the gcode of it at first.
Maybe there are some gcode this printer not support.
Maybe there are some gcode this printer not support.
-Keep your mind and try to test it.
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: A30 automatically pausing
Is there any list of supported and not supported G-Codes by A30?
Re: A30 automatically pausing
-Keep your mind and try to test it.
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: A30 automatically pausing
hi all i have the same problem i uploaded the latest software
on each print pause,
I tested the same g codes on tronxy x6a and it works fine.
i use cura and prusa slicer edition in all the same.
my geeetech a30 is the 24v version motherboard gtm 32
please help
the printer has 3 months
on each print pause,
I tested the same g codes on tronxy x6a and it works fine.
i use cura and prusa slicer edition in all the same.
my geeetech a30 is the 24v version motherboard gtm 32
please help
the printer has 3 months
Re: A30 automatically pausing
Hi, did you use http://geeetech.com/forum/viewtopic.php?f=92&t=61924-Keep your mind and try to test it.
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: A30 automatically pausing
Hi
thanks
if anyone can give a specific answer to this problem, I am not told anything by the G-codes.
19.01.2020
00:04
today it was displayed on LCD during printing
pause and then temp_exception
thanks
if anyone can give a specific answer to this problem, I am not told anything by the G-codes.
19.01.2020
00:04
today it was displayed on LCD during printing
pause and then temp_exception