New Firmware I3proC_G02_V1.0.04_01

Post Reply
BR365
Posts: 57
Joined: Mon Apr 16, 2018 7:24 pm

New Firmware I3proC_G02_V1.0.04_01

Post by BR365 » Mon Feb 18, 2019 6:56 pm

Hello,
My i3 Pro C has Firmware V1.0.04. What is the difference to V1.0.04_01?

Probably only change from treaded rods to trapezoidal threaded rods?

Moritz
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: New Firmware I3proC_G02_V1.0.04_01

Post by William » Tue Feb 19, 2019 2:33 pm

I've checked it.
It seems the same version firmware.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Detlef
Posts: 14
Joined: Tue Nov 27, 2018 12:01 am

Re: New Firmware I3proC_G02_V1.0.04_01

Post by Detlef » Thu Feb 21, 2019 10:50 pm

Dear Friends
It saddens me that I have been trying to get my GEEETECH i3C per operation in vain for two months. The problem is that no one can help me with the question WHY?
Is it the hardware or the software? Did I set wrong parameters somewhere, etc.

I would like to read a working GCODE file to see if the hardware works.
Handically, everything goes.

Maybe someone can help me?

best regards
Detlef
Top
BR365
Posts: 57
Joined: Mon Apr 16, 2018 7:24 pm

Re: New Firmware I3proC_G02_V1.0.04_01

Post by BR365 » Fri Feb 22, 2019 1:26 am

Here are some gcodes and my Slic3r Config.
Attachments
3D Print.7z
(2.17 MiB) Downloaded 433 times
Top
Detlef
Posts: 14
Joined: Tue Nov 27, 2018 12:01 am

Re: New Firmware I3proC_G02_V1.0.04_01

Post by Detlef » Fri Feb 22, 2019 2:24 am

Thank you very much
Best greetings from saxonia!
Detlef
Top
Post Reply

Return to “Firmware”