A10M hotend question

Post Reply
nodashi
Posts: 1
Joined: Wed Nov 21, 2018 4:15 pm

A10M hotend question

Post by nodashi » Wed Dec 12, 2018 4:35 pm

Looking to print some ABS is the hotend on the A10M all metal or not? im worried about burning the ptfe tubing. Thanks
Top
D_ave
Posts: 2
Joined: Thu Dec 13, 2018 1:17 am

Re: A10M hotend question

Post by D_ave » Thu Dec 13, 2018 1:19 am

A10m comes with all metal heat breaks so don't worry, there is on ptfe tubes to burn.
Top
User avatar
Tomyuan
Posts: 41
Joined: Thu Jan 11, 2018 3:55 pm

Re: A10M hotend question

Post by Tomyuan » Thu Dec 13, 2018 10:16 am

You can set the temp:
Hotend:240~250C
Heatbed:90~100C
:D
Top
Akuma
Posts: 49
Joined: Fri Nov 16, 2018 3:30 am

Re: A10M hotend question

Post by Akuma » Sat Dec 15, 2018 8:36 pm

It says it can print ABS when you buy the printer so I imagine so, but the PTFE goes deep into the hot end and I'd be interested to know if it melted. Printing PLA I've had issues with this hot end.
Top
Post Reply

Return to “Geeetech A10 Series”