How to add the printer Geeetech A10 to Cura

[Admin]

Hi guys!
Are you can't find Geeetech A10 on Cura?
Don't worry
Refer to these:
------------------------------ --------------------------------------------------
------------------------------------------------------------------------------------
Update:Thanks for @vert's suggestions.
1. We added the G29 for the start code
We added the "G1 Y230 F6000" for the end code（ 2019/1/7）
-----------------------------------------------------------------------------------------
2. We attached the PLA filament profile for Multi_mixer printer（2019/1/23）
-----------------------------------------------------------------------------------------
3. We set the default filament diameter to 1.75mm and it can work with Cura 4.0(2019/4/7)
-----------------------------------------------------------------------------------------
4.Thanks for @LisaE‘s suggestions.The profile updated.(2019.4.17)
-----------------------------------------------------------------------------------------
5. Deleted the "Heating gcode for nozzle/hotbed"in"start code".Added the meshes file.(2019.4.24)





1.Download Profile for Geeetech 3Dprinter

Cura4.0 resources.zip

(158.48 KiB) Downloaded 7215 times

Download the PLA filament profile for A30

Geeetech PLA_1.xml.zip

(930 Bytes) Downloaded 4529 times

------------------------------ --------------------------------------------------
------------------------------------------------------------------------------------
2. Unzip the zip file then you will get "resources"folder

Cura-1.png (76.4 KiB) Viewed 49512 times

------------------------------------------------------------------------------------
------------------------------------------------------------------------------------
3.Copy "resources" to the
Cura installation directory
Default:
C:\Program Files\Ultimaker Cura 4.0

Cura-2.png (127.3 KiB) Viewed 49512 times

Cura-3.png (127.9 KiB) Viewed 49512 times

Cura-4.png (70.33 KiB) Viewed 49512 times

------------------------------------------------------------------------------------
------------------------------------------------------------------------------------
4.Import filament profile

Cura-5.png (25.54 KiB) Viewed 49512 times

Cura-6.png (61.65 KiB) Viewed 49512 times

------------------------------------------------------------------------------------
------------------------------------------------------------------------------------
5.Done!Enjoy it!

[krismcewan]

Can you do one for the A10M?

[Merrill]

Thank you for preparing and sharing this.

[Trevenator]

Yes can you please do one for the A10M ?
Thanks

[grabejud]

My printer is coming. so it would be great to have the A10M settings for cura

[Mocco1301]

I did this and now Cura is starting my print too high and/under extruding. Switched back to Repetier Host and no problems at all with same bed level etc.

[schlaflosin030]

How to add the Extruder from A10 to Cura????
what is with the Extruder? All entrys are empty in thes Geeetech A10 Driver.
Or how can say wher i find a Post with thes answer.

it´s my first time in 3d-Printing and i´m an absolutly beginner, but i hope that ist will be better with your help

than´s and have a nice time

[Rogeralcon]

Warning: this file only works for PLA Yesterday I tried to print PETG, but initial gcode lowered the temperature to 200 * C without permission. This file was the Problem.

[aamulk]

Is there going to be a file made for the A10M? I would think that shouldnt be a problem for the developers especially when it is a recommended program!! I tried the custom route as suggested in the manual but the latest version of Cura does not give the FDM printer option only the FFM, as a result Cura does not seem to communicate with the printer.

[bensnapper]

Hi, brand new to the world 3D printer. I just got the A10 and trying to set up it's profile on Cura for it (Cura 4.4) and when i put the resource from the zip folder here into the cura folder in Programs, all the other printers appear but not the A10. Any suggestions?

when i look in the folder I see it there but Cura doesn't seem to pick it up in the list of printers.

Thank you