partscooling-fan not working at all

Post Reply
SebastianM
Posts: 9
Joined: Sun Nov 11, 2018 5:17 am

partscooling-fan not working at all

Post by SebastianM » Thu Nov 15, 2018 2:46 pm

Good morning from Germany!
Yesterday I received my A10 (new version with filament sensor) and the first print went very good. Unfortunately, my partscooling-fan does not work at all.
Neither when I print the sample gcode (A10_dog.gcode) nor when I set it in the menu to "255" (menu control / temperature / fan).
No reaction from the fan at all...

thx in adavance...

PS: This isnt my first 3d printer, so I know what I am doing :))
Top
User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:
Contact _kaktus_

Re: partscooling-fan not working at all

Post by _kaktus_ » Thu Nov 15, 2018 4:00 pm

Hello.
:mrgreen:

So, in the first step I would check the correctness of the connections.
The second step is whether there is a voltage on the fan's cables after the fan has been driven.
Check the 12/24V fan type and compare it with the control voltage.
;)
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Top
SebastianM
Posts: 9
Joined: Sun Nov 11, 2018 5:17 am

Re: partscooling-fan not working at all

Post by SebastianM » Fri Nov 16, 2018 12:56 am

ehm... where exactly are the pins for the parts-fan?
b335ac5f-bb9b-4ec6-92d9-c5eca32ecf22.png
b335ac5f-bb9b-4ec6-92d9-c5eca32ecf22.png (878.52 KiB) Viewed 14804 times
Top
SebastianM
Posts: 9
Joined: Sun Nov 11, 2018 5:17 am

Re: partscooling-fan not working at all

Post by SebastianM » Fri Nov 16, 2018 3:58 am

Update: I played a bit with the cables and now it seems to work...
I will keep an eye on it.

thx!
Top
Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: partscooling-fan not working at all

Post by Gingko » Fri Nov 16, 2018 10:00 am

Check the slot on the extension board first (seems you got it).
So it might be the poor connection? ;)
Top
Matteo Simioni
Posts: 1
Joined: Sun Oct 21, 2018 1:00 am

Re: partscooling-fan not working at all

Post by Matteo Simioni » Sat Nov 17, 2018 4:12 am

SebastianM wrote: ↑
Thu Nov 15, 2018 2:46 pm
 Good morning from Germany!
Yesterday I received my A10 (new version with filament sensor) and the first print went very good. Unfortunately, my partscooling-fan does not work at all.
Neither when I print the sample gcode (A10_dog.gcode) nor when I set it in the menu to "255" (menu control / temperature / fan).
No reaction from the fan at all...

thx in adavance...

PS: This isnt my first 3d printer, so I know what I am doing :))
Hi SebastianM, I am having exactly the same problem with my A10 that arrived few days ago, can you please tell me exactly how you solved?

Thanks very mutch!
Top
SebastianM
Posts: 9
Joined: Sun Nov 11, 2018 5:17 am

Re: partscooling-fan not working at all

Post by SebastianM » Mon Nov 19, 2018 4:47 pm

Like this.... :twisted: :twisted:
https://www.youtube.com/watch?v=J8xEsue_Xa8
Top
mathiaskahn
Posts: 3
Joined: Tue Nov 27, 2018 6:15 am

Re: partscooling-fan not working at all

Post by mathiaskahn » Mon Dec 17, 2018 7:23 am

Exact same problem here, with new A10 (GT2560 v3.0 mainboard).
Proposed solution (play with cable) does not solve.
Any idea ?

Thanks
Top
SebastianM
Posts: 9
Joined: Sun Nov 11, 2018 5:17 am

Re: partscooling-fan not working at all

Post by SebastianM » Fri Dec 21, 2018 6:30 am

I got a replacement Fan...
Top
Post Reply

Return to “Geeetech A10 Series”