Geeetech A10M and 3D touch sensor

[aarli]

Here,
I compiled 1.1.8 with 3d touch support. All you need to do is download, unzip and upload to printer.

Geeetech_A10M_Marlin_1.1.8_with_3d_touch_defaults.mega.zip

Geeetech A10M Marlin 1.1.8 with 3d touch for GT2560 (hex-file)

(125.99 KiB) Downloaded 950 times

My A10M+3DTouch on Marlin 1.1.9 firmware will follow soon....

[Wolle82]

Would you make it for the A10 (GT2560 Rev B) too?

[aarli]

Would you make it for the A10 (GT2560 Rev B) too?

Sure. No problem. My A10 is with the exact same board revision.

I actually have one initial Marlin 1.1.9 in another forum post uploaded here.
And now I just finished upgrading A10M to 1.1.9 (Based on Geeetech3D repo above)

First functional hex-file just came out ot the compiation oven
Gonna be testing today.

Just pushed the first commits to my fork at github:
https://github.com/harlyh/Prusa_I3_3Dpr ... h-3D-Touch

Once testing results and fine-tunings are OK, I'll upload the precompiled hex too

[_kaktus_]

Hi


The possibility of downloading a ready-made HEX or BIN file will be very convenient for many users.
You will get their gratitude.

[aarli]

I uploaded the hex file too.
https://github.com/harlyh/Prusa_I3_3Dpr ... 3d%20touch

Still needs some proper testing. I have been working on a colour 3d model, which I hopefully get to print tonight while also evaluating the firmware. Mostly the config is the same as on my A10 build of 1.1.9

Here's it doing some Bed Levelling:
https://www.youtube.com/watch?v=5GHhovd3m7I

[aarli]

Uploaded both 3d touch and non-3d touch version of hex files.

https://github.com/harlyh/Prusa_I3_3Dpr ... hex%20file

3D Touch in action with today's firmware:
https://www.youtube.com/watch?v=5GHhovd3m7I

[aarli]

Uploaded complied hex firmware v 1.1.8 for non 3d touch (unmodified buid, as is)

here


Also fixed my 1.1.9 build. The "no 3d touch" version still assumed that sensor is connected. Now it seems to be fixed
Both built firmware hex files versions ("with 3d touch" and "no 3d touch") are here

[aarli]

I suggest we close this topic and move the discussion to the main thread I created with today's firmware build:
viewtopic.php?f=91&t=61728

[_kaktus_]

Your wish is an order for me.