Setting up under Linux Ubuntu 18.04

[sebastian92]

Hi,

i have a problem connecting to the printer running under linux ubuntu 18.04. I tried to install the usb driver CH340 as said here: viewtopic.php?t=60612

but running the installation with sudo make it throws and error:

Code: Select all

make -C /lib/modules/4.13.0-36-generic/build  M=/home/sebastian/Downloads/CH341SER_LINUX  
make[1]: *** /lib/modules/4.13.0-36-generic/build: No such file or directory.  Stop.
Makefile:5: recipe for target 'default' failed
make: *** [default] Error 2

has someone struggled with the same problem?

greetings!

[_kaktus_]

Hello.


After updating the UsbIds database and displaying the devices connected to the usb port, do you get correct and complete information?

Below you have two sample links that I found ...
http://manpages.ubuntu.com/manpages/xen ... eebsd.html
https://arduino.stackexchange.com/quest ... with-ch340

[sebastian92]

i dont get it updated. it returns an error as i wrote
I also setup an Ubuntu 16.04 version on my laptop still the installation of the driver does not complete and the usb connection is not recognized.
But in the lsusb i can find the usb connection.

[_kaktus_]

Hi


update-usbids returns an error

[sebastian92]

no update-usbids returns no error!

[_kaktus_]

Sebastian, that is an individual case.
Try to solve it yourself, it concerns the linux environment.
You can ask for the support of the community on the ubuntu forum.

Follow the bugs in the compilation you are trying to do.