For future replacements/upgrades , any one know the specs of the inside print head connectors for the heater and thermocouple?
Thank you in advance.
Mark
Print head connectors
-
MarkFish54
- Posts: 13
- Joined: Wed Aug 22, 2018 10:11 am
Re: Print head connectors
Or should I ask a different way?
Are the inside print head connectors 2.54mm JST-XHP?
Thank you in advance.
Mark
Are the inside print head connectors 2.54mm JST-XHP?
Thank you in advance.
Mark
Re: Print head connectors
Hi
If it's not a problem for you then show the photo of the connector you're asking for.
Also measure the distance between the pins.
If it's not a problem for you then show the photo of the connector you're asking for.
Also measure the distance between the pins.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.