Hi All,
I am new to 3D printing, and thought the assembly would be more difficult than actually printing. I have completed my first item but it is falling apart and looks ver stringy. I think it could either be the Filament is not getting hot enough or the slicer I am using is not correct. If I am totally wrong please can you direct me in the direction of the truth. Please see sample of issues.
James
My first 3d print completed but issues
My first 3d print completed but issues
- Attachments
-
- IMG_20180826_174611.jpg (217.06 KiB) Viewed 20336 times
-
- IMG_20180826_174559.jpg (198.66 KiB) Viewed 20336 times
Re: My first 3d print completed but issues
Hi
You are right, you are completely wrong.
First of all, I will recommend you to read the forum and find out what others have done in a similar situation.
You are right, you are completely wrong.
First of all, I will recommend you to read the forum and find out what others have done in a similar situation.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Re: My first 3d print completed but issues
I have tried many things from this from and no go. 
.
.Re: My first 3d print completed but issues
What you have already tried is the best way to cooperate on the forum. You will save time for others.
This problem is a common problem for anyone who starts their adventure in the 3D world.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Re: My first 3d print completed but issues
Hi,
I have tried increasing the feedrate, from 100 to 204 this is how I got this result. Something's I have noticed my z axis when I home it, it goes up about 0.5m but not down to the stop switch. Also I have tried using STL files from thingiverse and tinkercad.
James
I have tried increasing the feedrate, from 100 to 204 this is how I got this result. Something's I have noticed my z axis when I home it, it goes up about 0.5m but not down to the stop switch. Also I have tried using STL files from thingiverse and tinkercad.
James
Re: My first 3d print completed but issues
You need to adjust the stepper mm of Z axis(Your printer z axis rod it T8)
http://www.geeetech.com/forum/viewtopic ... 20&t=17046
http://www.geeetech.com/forum/viewtopic ... 20&t=17046