Hi there!
I need to verify e-steps of my A30.
Where i can find actual e-steps setting?
Thanks a lot,
k40z
How to calibrate e steps?
Re: How to calibrate e steps?
viewtopic.php?f=17&t=60639&p=82054#p82054
Download the motor tool and connect it with your printer, then you can get status or set steps.
Download the motor tool and connect it with your printer, then you can get status or set steps.
Re: How to calibrate e steps?
sean wrote: ↑Wed Aug 08, 2018 11:18 amhttps://github.com/Geeetech3D/Smartto-Tool we moved the tools to single project.
We are not suggest that modifing motor parameters now(2018/8/8).Because there are some fatal errors in newest firmware(1.39.62 for A30/1.33.42 for E180) but only these firmwares support PID commands.
We are working on it...
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Re: How to calibrate e steps? [solved]
Thank you.
Has worked for me with motor controller.
Regards.
Has worked for me with motor controller.
Regards.
Re: How to calibrate e steps?
Yes, the PID and some rest commands cannot be used right now, but as for travel speed, step, direction, and velocity are still available._kaktus_ wrote: ↑Wed Aug 08, 2018 3:10 pmsean wrote: ↑Wed Aug 08, 2018 11:18 amhttps://github.com/Geeetech3D/Smartto-Tool we moved the tools to single project.
We are not suggest that modifing motor parameters now(2018/8/8).Because there are some fatal errors in newest firmware(1.39.62 for A30/1.33.42 for E180) but only these firmwares support PID commands.
We are working on it...