Serial Interface IIC I2C TWI 2004 204 20x4 LCD Dis

Post Reply
dandlion1
Posts: 4
Joined: Sat Jun 28, 2014 8:51 am

Serial Interface IIC I2C TWI 2004 204 20x4 LCD Dis

Post by dandlion1 » Sat Jun 28, 2014 9:09 am

Just got this 20x4 LCD board (JND2004A) with your GEEETECH LCD1602 Serial interface module. I can't get it to work with any of the sample ("Hello World") Arduino sketches I can find on line. All I get is 2 lines of block characters (all pixels on) - looks like the first and third line. The back-light will come on for a while - then blink - then go off.

Can you please provide spec sheet and a sample Arduino Sketch for this module.
Thank you very much.

User avatar
techsupport
Site Admin
Posts: 210
Joined: Sat Mar 03, 2012 2:32 pm

Re: Serial Interface IIC I2C TWI 2004 204 20x4 LCD Dis

Post by techsupport » Mon Jun 30, 2014 10:47 am

hi,dandlion, You can refer to the following link:
http://www.geeetech.com/wiki/index.php/ ... LCD_Module
Your real trustworthy partner in China!!
Email: forum@geeetech.com

dandlion1
Posts: 4
Joined: Sat Jun 28, 2014 8:51 am

Re: Serial Interface IIC I2C TWI 2004 204 20x4 LCD Dis

Post by dandlion1 » Mon Jun 30, 2014 12:01 pm

Thank you.
I tried the Sketch in the link you supplied.
Since it was for a 16x2 display, I changed the code from
LiquidCrystal_I2C lcd(0x27,16,2);
to
LiquidCrystal_I2C lcd(0x27,24,4);

Either way, it does not work. I get the same result as I specified in my first post.
Sample Sketch for 24x4 Display.jpg
Sample Sketch for 24x4 Display.jpg (143.36 KiB) Viewed 283614 times

User avatar
techsupport
Site Admin
Posts: 210
Joined: Sat Mar 03, 2012 2:32 pm

Re: Serial Interface IIC I2C TWI 2004 204 20x4 LCD Dis

Post by techsupport » Mon Jun 30, 2014 6:08 pm

I think you first operation is right,LiquidCrystal_I2C lcd(0x27,16,2); you can try it again,
If the back-light still come on for a while - then blink - then go off,
You can adjust the potentiometer of blue and press the reset button.
Your real trustworthy partner in China!!
Email: forum@geeetech.com

Wilbur1225
Posts: 3
Joined: Fri Oct 14, 2016 12:29 pm

Re: Serial Interface IIC I2C TWI 2004 204 20x4 LCD Dis

Post by Wilbur1225 » Fri Oct 14, 2016 12:37 pm

As the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface LCD module, you will be able to realize data display via only 2 wires. If you already has I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic for Arduino based project.

irenejacob
Posts: 1
Joined: Fri Aug 25, 2017 6:34 pm

Re: Serial Interface IIC I2C TWI 2004 204 20x4 LCD Dis

Post by irenejacob » Fri Aug 25, 2017 6:47 pm

You need to design program and connect all pins of LCD display and Arduino board correctly.

daisyfaith
Posts: 0
Joined: Thu Jun 28, 2018 1:10 pm

Re: Serial Interface IIC I2C TWI 2004 204 20x4 LCD Dis

Post by daisyfaith » Thu Jun 28, 2018 1:16 pm

You need to design program and connect all pins of LCD display and Arduino board correctly.


TimothyRembert
Posts: 1
Joined: Wed Oct 10, 2018 6:39 pm

Re: Serial Interface IIC I2C TWI 2004 204 20x4 LCD Dis

Post by TimothyRembert » Wed Oct 10, 2018 6:44 pm

Thank you so much for this post. Do you want a more creative, meaningful career? Please refer best dissertation writing service to get a meaningful carrier in the future.

DanielWeaver
Posts: 1
Joined: Thu Oct 11, 2018 6:02 pm

Re: Serial Interface IIC I2C TWI 2004 204 20x4 LCD Dis

Post by DanielWeaver » Thu Oct 11, 2018 6:26 pm

Great post. I really appreciate this post that you have posted for us. Are you looking for annotated bibliography writing service Help? Our writers can help you round the clock. Contact us for best grades.

Post Reply