E180 Mini print directly from Cura

[ALE5510]

I'm new and quite (very xD) inexperienced by 3d printers.
I have for a couple of days the E180 Mini that I managed to miraculously connect it in wifi.
Now I would like to know kindly if you can print directly from Cura.

P.S. I have already connected the printer to EasyPrint 3d and updated.

[Gingko]

Yes, you can also print with cura, it connects to your printer automatically,
and you can also find configs from forum.

[ALE5510]

Could you paste the link on how to set up the connection of the E180 mini with care to print directly? I can not find it. Thank you! =)

[Gingko]

refer to:
viewtopic.php?f=68&t=60785

[_kaktus_]

Searching the forum and reading its content you will get a lot of practical and very helpful information.
In this way, you will gain knowledge which will allow you to solve your problems on your own.

[adda]

Has somebody else issues with the new Cura release 3.4.0 ? The E180 profile for Cura does not work with this new version for me. With the former release 3.3.1 I did not have any problems.

[Gingko]

Has somebody else issues with the new Cura release 3.4.0 ? The E180 profile for Cura does not work with this new version for me. With the former release 3.3.1 I did not have any problems.

"does not work" means Cura cannot detect/connect with your printer or just cannot upload the file?

[adda]

It means Cura 3.4.0 connects with the printer but prints bull shit and stops after a while

[Odessa]

Here is the article is about the products used for the welfare of human beings and many more. I referred to you please purchase all items by custom dissertation service and gives your feedback I m waiting for your opinion.

[wiluxisup]

There are companies that are inventing their new machinery so that they can help all users. On the other hand, school bus hire is there for following the new things that are based on new concepts.