GT2560 driver for Windows 7 64 BIT

Post Reply
TM-234
Posts: 2
Joined: Sat Mar 31, 2018 3:22 am

GT2560 driver for Windows 7 64 BIT

Post by TM-234 » Tue May 15, 2018 7:45 am

I did a search over the internet... still no answer... any one knows where to get the driver, first of all I plugged the USB cable but my computer does not recognize it. HELP .. thanks !

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: GT2560 driver for Windows 7 64 BIT

Post by Gingko » Tue May 15, 2018 11:38 am

Have you tried different drivers from here?:
viewtopic.php?f=21&t=60612&p=81974#p81974

TM-234
Posts: 2
Joined: Sat Mar 31, 2018 3:22 am

Re: GT2560 driver for Windows 7 64 BIT

Post by TM-234 » Wed May 16, 2018 8:41 am

Thanks, my PC has recognized the new port... but... in Arduinio 1.8.5, I did what Geeetech show on their web page... the firmware code doesn't show... I chose Arduino Mega 2560, no code at all to upload ????? Any help! Thanks.

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: GT2560 driver for Windows 7 64 BIT

Post by Gingko » Wed May 16, 2018 11:28 am

What's your printer model?
You should download the firmware first and open the firmware in Arduino.
Firmware found here:
viewtopic.php?f=20&t=17046

TM-234
Posts: 2
Joined: Sat Mar 31, 2018 3:22 am

Re: GT2560 driver for Windows 7 64 BIT

Post by TM-234 » Fri May 18, 2018 10:40 am

My printer is ANET A8, I changed the stock board for a GT2560, on your list I don't see ANET A8 (I know not from Geeetech), which one should I choose, I guess I will have to change some setting to fit ANET A8 specs.

Post Reply