Geeetech Prusa i3 Pro C - Impressions and Videos

[BR365]

Hello,
i will summarize here my impressions and experience with our Geeetech Prusa i3 Pro C 3D Printer.

Find here my Playlist on YouTube, showing my own print results and progress: https://www.youtube.com/watch?v=2UewBv3 ... -B0rU-WOW-

I appreciate Your comments, critics and, of course, subscription to my Video Channel.

Thanks,
Moritz

[BR365]

In this video, You see the 3D printing of a speaker box for railway modelling loadspeakers. Those small speaker boxes enhance the sound volume and bass.

https://www.youtube.com/watch?v=e9rw_Sm4C-4

[BR365]

Find here some pictures of the final soundbox:

[img]https://up.picr.de/32527583as.jpg[/img]

[img]https://up.picr.de/32527584qa.jpg[/img]

[img]https://up.picr.de/32527585bx.jpg[/img]

[img]https://up.picr.de/32527586sa.jpg[/img]

[img]https://up.picr.de/32527587oe.jpg[/img]

[BR365]

I printed a PSU cover to enhance the electrical security of the power supply: https://modellbauhuette.dettenbachtal.d ... d-drucker/

This was the first print, looks quite good.



The second print was not so good, had to change the nozzle first and printed with higher temperature, 205°C:



Third print, even better, now again like the first print with 195°C.



I strongly recommend to apply this case to Your i3 Pro B/W/X models, because the electric installation is a real risk!

Find me on Thingiverse: https://www.thingiverse.com/Modellbauhuette/about

[BR365]

Time Lapsed video from print process on my Geeetech i3 Pro C printer:

https://www.youtube.com/watch?v=BOsBLv3qI2Q

[_kaktus_]

Hi.


There is a problem with your link. Can you correct it

I like your PSU enclosure. I made a bit different.
.

DSC07635.JPG (343.88 KiB) Viewed 11814 times

.
I wanted the power cord plug to be placed deeper and not to be an obstacle.

[BR365]

Hi Cactus,
thanks for the hint to the wrong link. It should work now.

With Your solution, the Power Plug is still open to the interior side of the printer. Or did You create two cases?

Moritz

[_kaktus_]

Yes, you are right.

I am planning to make a second cover from the inside.
This will be the larger cover will also cover the threaded rods.

[BR365]

Here is now my final Version 5 of the 250W PSU Cover:

https://www.thingiverse.com/thing:3429339

[_kaktus_]

Hi.


Good work.
Now the cable is not an obstacle.
Is it easy to install this cover