Nozzle does not go up during printing.

Post Reply
idrosahmad62
Posts: 0
Joined: Wed Nov 22, 2017 1:24 pm

Nozzle does not go up during printing.

Post by idrosahmad62 » Thu Apr 05, 2018 11:24 am

I managed to assemble and manual test all XYZ and extruders motors of Geetech Rostock 301 that I bought via Banggood, August last year. But I found that the nozzle keep staying at Z=0 when I try to print a file. Would appreciate assistance from Geetech or Forum members to solve the issue. For info, I have not done any firmware refresh to the printer.

Regards
idrosahmad62
Top
User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:
Contact _kaktus_

Re: Nozzle does not go up during printing.

Post by _kaktus_ » Thu Apr 05, 2018 10:50 pm

When you calibrate the printer, use the offset option.
Top
idrosahmad62
Posts: 0
Joined: Wed Nov 22, 2017 1:24 pm

Re: Nozzle does not go up during printing.

Post by idrosahmad62 » Sat Apr 07, 2018 12:15 pm

Thank you kaktus for your response. I will try and update.
Regards
Top
Post Reply

Return to “Geeetech Delta Series”