unload filament

Post Reply
MarcoSturaro
Posts: 0
Joined: Mon Mar 05, 2018 11:05 pm

unload filament

Post by MarcoSturaro » Sat Mar 24, 2018 6:13 pm

i can't remove the filament to replace it with the new one. What is the correct procedure?
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: unload filament

Post by William » Tue Mar 27, 2018 4:25 pm

You need heating the nozzle at first then you can remove it off.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
rjorthmann
Posts: 0
Joined: Wed Mar 28, 2018 10:21 am

Re: unload filament

Post by rjorthmann » Wed Mar 28, 2018 10:28 am

I'm unable to remove filament from the print head, I've tried heating the extruder but it still will not come out. What am I doing wrong.
Thank you for any help.
rjorthmann
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: unload filament

Post by William » Wed Mar 28, 2018 6:02 pm

1.Heating it up to 220C
2.Then press the pressure bar
3.Refer to this video and then load the filament again
https://www.youtube.com/watch?v=3iS8YU_TNEw
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
rjorthmann
Posts: 0
Joined: Wed Mar 28, 2018 10:21 am

Re: unload filament

Post by rjorthmann » Fri Mar 30, 2018 8:19 am

I've noticed a problem that I saw on the original build "ERR:MAXTEMP". The Print head has a thermistor that is broke, I can change the temperature now movining the thermistor wires. Is this something I can replace ?
Thank you
rjorthmann
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: unload filament

Post by William » Mon Apr 02, 2018 8:09 pm

rjorthmann wrote: ↑
Fri Mar 30, 2018 8:19 am
 I've noticed a problem that I saw on the original build "ERR:MAXTEMP". The Print head has a thermistor that is broke, I can change the temperature now movining the thermistor wires. Is this something I can replace ?
Thank you
rjorthmann
You can get it easily.
It is a 100K thermistor.
You can get it from local
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Post Reply

Return to “Geeetech I3 Pro W”