How to fix-E180>The screen displayed not correct or black screen

[Admin]

Hi, guys!

How to fix the screen displayed not correct or black screen-E180?
Well.Here are the files for the LCD:

e180-lcd.rar

(613.54 KiB) Downloaded 2208 times

Updates:New UI for E180

E180_UI for v1.32.41.zip

(440.24 KiB) Downloaded 2188 times

------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
Guide
1.You should open the side protection cover

E180-1.jpg (87.75 KiB) Viewed 55062 times

2.You should take off the sd card

E180-2.jpg (56.33 KiB) Viewed 55062 times

E180-3.png (193.85 KiB) Viewed 55062 times

3.Format the SD card
4.Copy the un-zip files to root directory of the sd card

E180-4.png (7.32 KiB) Viewed 55062 times

[jhoff]

I downloaded the file but cannot unzip it because it requires a password. Please advise. Thank you!

[William]

I have downloaded, and did not find the need for a password

[_kaktus_]

I wonder why you do not give checksums to files that can be downloaded on the forum.

[vital]

Do you have step by step instruction how to open side cover without damage printer?
I need to remove some screws.

[michaelconti]

I donwload the file, formatted the SD, copy the file and...result is a wrong screen...not working only white and black line :(

[michaelconti]

I have a problem, i have do everything in the right sequence but after that my disply don't work anymore and the sd too...

[William]

I have a problem, i have do everything in the right sequence but after that my disply don't work anymore and the sd too...

Could you upload a screenshot of the sd card root directory?

[michaelconti]

i found was the sd don't working anymore, so i changed it but bow when i print from sd, object with large dimension the printer reset and stop print

[William]

i found was the sd don't working anymore, so i changed it but bow when i print from sd, object with large dimension the printer reset and stop print

Could you upload the Gcode of your sd card?