Extruder temperature

Pusilanime · Post by **Pusilanime** » Mon Jan 29, 2018 10:47 am

Hi, I didn't find any thread about this issue, then I ask for help hier
The printer works well and then, randomly After a few minutes the hotend stops heating. Temperature goes to 0 gradually and Display shows for example EXTRUDER TEMP 200/0, while before was 200/200
I tried 3 times and always have the same Problem. Extruder doesn't work anymore after a few minutes because of the temperature of the hotend.
What could be the problem?

Post by **William** » Mon Jan 29, 2018 8:01 pm

Have you tried to check the wiring of Extruder?

Pusilanime · Post by **Pusilanime** » Mon Jan 29, 2018 8:32 pm

Problems started last week, before that was all right.
I checked the wiring :

https://photos.app.goo.gl/SRl5i5kAeOuF34on1

Pusilanime · Post by **Pusilanime** » Mon Jan 29, 2018 8:37 pm

PS: printer OFF

Post by **William** » Tue Jan 30, 2018 9:45 am

It seems not normal（Normal is 1~6Ω）

Pusilanime · Post by **Pusilanime** » Tue Jan 30, 2018 12:18 pm

[quote=William post_id=82343 time=1517276719 user_id=51382]
It seems not normal（Normal is 1~6Ω）
[/quote]

Are you saying, that the problem is on the wiring?
If yes, is there a video explaining how to repair/change the cables?

Pusilanime · Post by **Pusilanime** » Wed Jan 31, 2018 10:58 am

What are you saying?
I have a broken cable? How can I fix it please?

Post by **William** » Thu Feb 01, 2018 9:46 am

It seems you need a new heating bar

Geeetech

Extruder temperature

Extruder temperature

Re: Extruder temperature

Re: Extruder temperature

Re: Extruder temperature

Re: Extruder temperature

Re: Extruder temperature

Re: Extruder temperature

Re: Extruder temperature