config.ini

Post Reply
colin.eamens@c-eamens.wales
Posts: 0
Joined: Wed Dec 27, 2017 1:01 am

config.ini

Post by colin.eamens@c-eamens.wales » Sun Dec 31, 2017 11:48 pm

I have finaly finishing building my Rostock 301 3D Printer and am in the process of setting it to start my first print. following the Manual i have levelled the Hot bed and am now on the set up the slicer softeare.

It mentions loading a Rostock 301 PLA config .ini file.

Where do i find this also will i need to load a ABS config.ini file as well

I am going to try with ABS first

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: config.ini

Post by William » Tue Jan 02, 2018 5:10 pm

ABS is sensitive to temperature, so I do not recommend that you start your journey with ABS printing
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

colin.eamens@c-eamens.wales
Posts: 0
Joined: Wed Dec 27, 2017 1:01 am

Re: config.ini

Post by colin.eamens@c-eamens.wales » Wed Jan 03, 2018 5:04 am

Thank you, I have also bought some PLA so will take your advice and try thhat first.

Do you know where to find the Config file mentioned in the user manual.

Thanks

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: config.ini

Post by William » Wed Jan 03, 2018 2:59 pm

It is my own Rostock 301
Rostock301.zip
(1.59 KiB) Downloaded 669 times
config.ini
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: config.ini

Post by William » Wed Jan 03, 2018 3:01 pm

I think you can use Repetier-Host for slicing
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply