Hello. Purchased my first printer (Geeetech i3 Pro B) and should be arriving in the next few days. I'd like to upgrade the Z axis leadscrews right away and I'm not sure the length I need to get for the Pro B. My understanding is they are 8mm but what length?
I was looking at these but maybe find some in steel.
http://www.ebay.com/itm/100mm-600mm-3D- ... cD6Zk3G3Ow
Would I need different couplers too?
Thank you!
Travis
Leadscrew length (Z Axis) for i3 Pro B?
Re: Leadscrew length (Z Axis) for i3 Pro B?
You mean the pitch? The pitch is 1.25mm
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-
travishauch
- Posts: 4
- Joined: Wed Aug 23, 2017 4:28 pm
Re: Leadscrew length (Z Axis) for i3 Pro B?
The length I need to buy to replace the current z axis rods.. such as 250mm, 300mm?
They sell them from 100mm to 600mm lengths.
They sell them from 100mm to 600mm lengths.
-
travishauch
- Posts: 4
- Joined: Wed Aug 23, 2017 4:28 pm
Re: Leadscrew length (Z Axis) for i3 Pro B?
Just looked in the packing list on the site and it says 300mm.