Hello there!
Could someone help me out with changing the firmware so that the port for extruder 2 gets activated insted of the port for extruder 1? I have been looking a bit in the pins file and got confused by all the diffrent pin numbers for the extruders. How do I even know what pins the extruders are?
I did look at this: https://www.geeetech.com/forum/viewtopi ... 20&t=18020
But the changes did not seem to make any diffrence.
Thanks!
Change extruder pins on GT2560
Re: Change extruder pins on GT2560
Can I have a look to your modified results and unmodified firmware，in general，the way of the link showing takes effect.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Change extruder pins on GT2560
Actually got some soldering help on another forum so I got my first port working again. Won't be needing this, anyways, thanks!
Re: Change extruder pins on GT2560
Congratulations
-Keep your mind and try to test it.
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!