Slowest travel speed

[htp]

Hello,

I have a Prusa i3 M201 with the GTM32 Pro B board and I was wondering what the slowest travel speed that it can achieve.

Ideally, I would like for it to move less than 1 mm/s, perhaps even 1/10 mm/s if it is possible. Please let me know if you have any ideas that can assist me in making the travel speed very slow.

Thank you!

[William]

We used to calibrate the lowest speed to 30 mm/s , you are just able to have a try moving less than 1 mm/s that do less harm to your printer.

[htp]

We used to calibrate the lowest speed to 30 mm/s , you are just able to have a try moving less than 1 mm/s that do less harm to your printer.

How will I be able to try this? I am able to get it to about 1 mm/s but I would like to get it to be even slower. Will this harm my printer?

[William]

There is no harm to your printer even you get it to 0.1mm/s ,to be honest ,I have not tried the such lower printing speed.