Hi,Mikael
Yes,you need reflash it.The latest version is 1.0.0.2.
Read this:
http://www.geeetech.com/forum/viewtopic ... 20&t=18167
Rostock 301 bugs report
Re: Rostock 301 bugs report
The latest version is 1.0.02 !
Un pour tous et tous pour un !
One for all and all for one !
-------------------------------------
Mon imprimante modifié : http://forums.reprap.org/read.php?178,781375,781375
Voir aussi pour mes pièces : https://www.thingiverse.com/thing:2464177
One for all and all for one !
-------------------------------------
Mon imprimante modifié : http://forums.reprap.org/read.php?178,781375,781375
Voir aussi pour mes pièces : https://www.thingiverse.com/thing:2464177
Re: Rostock 301 bugs report
Hi,bang wrote:Hi,Mikael
Yes,you need reflash it.The latest version is 1.0.0.2.
Read this:
http://www.geeetech.com/forum/viewtopic ... 20&t=18167
I did read that
- but typically version numbers go Major.Minor.Patch. When I have a "1.1.0 A", then that is higher than "1.0.0.2"?Can you indicate what are the different versions shipped? Or what are the differences from one version to the other?
Re: Rostock 301 bugs report
Hello,
Bonjour,
You can find the original text into English following this original French text.
Vous trouverez le texte original traduit en anglais à la suite du présent texte original en français.
Pourquoi tout le monde répète la même erreur ?
Le numéro de la dernière version n'est pas 1.0.0.2, le bon numéro de version est 1.0.02 !
Cordialement,
L'ami René
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hello,
Excuse me, I am unilingual francophone and I use Google translator to translate the texts of the forum in French and to write to you in English. Thank you for your understanding and your indulgence for these texts translated mechanically!
Why does everyone repeat the same mistake?
The number of the latest version is not 1.0.0.2, the correct version number is 1.0.02!
Cordially,
Friend René
Bonjour,
You can find the original text into English following this original French text.
Vous trouverez le texte original traduit en anglais à la suite du présent texte original en français.
Pourquoi tout le monde répète la même erreur ?
Le numéro de la dernière version n'est pas 1.0.0.2, le bon numéro de version est 1.0.02 !
Cordialement,
L'ami René
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hello,
Excuse me, I am unilingual francophone and I use Google translator to translate the texts of the forum in French and to write to you in English. Thank you for your understanding and your indulgence for these texts translated mechanically!
Why does everyone repeat the same mistake?
The number of the latest version is not 1.0.0.2, the correct version number is 1.0.02!
Cordially,
Friend René
Un pour tous et tous pour un !
One for all and all for one !
-------------------------------------
Mon imprimante modifié : http://forums.reprap.org/read.php?178,781375,781375
Voir aussi pour mes pièces : https://www.thingiverse.com/thing:2464177
One for all and all for one !
-------------------------------------
Mon imprimante modifié : http://forums.reprap.org/read.php?178,781375,781375
Voir aussi pour mes pièces : https://www.thingiverse.com/thing:2464177
Re: Rostock 301 bugs report
M84 S0 doesn't hold the motors for me - at least not from manual control in Repetier host - the command that does hold the motors in manual control isflintewn wrote:Same first 2 bugs as raoulito9.
...
M104 S0 ; turn off temperature
G28 ; home axis
M84 S0 ; hold motors
...
M17
...
No beep here with latest FW...Lami Rene wrote: ...
M300 S1244 P500
...
Re: Rostock 301 bugs report
Did you solve your problem?
After a successful print.My end script is G28, to remove hotend from my nice print !
G 28 works, but just after, steppers switch off and the the still very hot hotend crashes into my print.
I tried the M17 command, but nothing changes.