GT2560 5v pins and GND

Post Reply
PauloSilva
Posts: 10
Joined: Sat Feb 25, 2017 11:30 pm

GT2560 5v pins and GND

Post by PauloSilva » Wed May 31, 2017 2:21 am

Hello, can anyone help with finding 5v pins and GND
I would like to connect a relay of 5v to the GT2560
Can i use one vacant endstop? are they 5v?

Thank you
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: GT2560 5v pins and GND

Post by William » Thu Jun 01, 2017 2:03 pm

Hi,here is the position of 5V and GND.
1.png
1.png (1.05 MiB) Viewed 8379 times
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
PauloSilva
Posts: 10
Joined: Sat Feb 25, 2017 11:30 pm

Re: GT2560 5v pins and GND

Post by PauloSilva » Thu Jun 01, 2017 7:03 pm

Is that a 5V PIN? what is the number of the PIN?
thank you
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: GT2560 5v pins and GND

Post by William » Fri Jun 02, 2017 11:20 am

You can use the rest endstop pin of the board.There are actually 3 pins on the postition of endstop connector .Remove one of the connector from the board and replace it with a 3pin straight Pin.You need to use soldering iron here.Then you can use the +5V pin.
2.png
2.png (693.92 KiB) Viewed 8368 times
1.png
1.png (658.66 KiB) Viewed 8368 times
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Post Reply

Return to “Control Board”