Hello!
I am having problems with the leveling of the printer and I do not find who can help me.
I have followed all the instructions in the manual, I have leveled successfully but when printing it makes a bow with respect to the central point of more than 15mm, besides that nothing plastic comes out, it seems that the extruder motors do not push the filament enough.
I would greatly appreciate your help.
Thank you!
Hola!
Estoy teniendo problemas con la nivelación de la impresora y no encuentro quien me pueda ayudar.
He seguido todas las instrucciones del manual, he nivelado con éxito pero al imprimir me hace un arco respecto al punto central de más de 15mm, además que no sale nada de plástico, parece que los motores del extrusor no empujan lo suficiente al filamento.
Os agradecería mucho vuestra ayuda.
Gracias!
Problems with the leveling Rostock 301
Re: Problems with the leveling Rostock 301
Hi,As to the leveling,ould you take a video to show more detail about your leveling result?
As to the extruder,you can disassemble the fan of extrduder to check if it works normally.Also you can refer to this post:http://www.geeetech.com/forum/viewtopic ... 19&t=17097.
As to the extruder,you can disassemble the fan of extrduder to check if it works normally.Also you can refer to this post:http://www.geeetech.com/forum/viewtopic ... 19&t=17097.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!