firmware 3d touch sensor for i3 pro x

Post Reply
gemini0090
Posts: 3
Joined: Tue Jan 24, 2017 5:42 am

firmware 3d touch sensor for i3 pro x

Post by gemini0090 » Mon Mar 13, 2017 6:06 am

Hello,
I would like to know if there is already a firmware download for your printer geeetech i3pro x with 3d toch sensor, and maybe even for the double extruder.
because I can not open the file for editing pin.h pin through arduino ide 1.01.
Thanks look forward to a response.
Top
bang
Posts: 402
Joined: Wed Dec 28, 2016 2:12 pm

Re: firmware 3d touch sensor for i3 pro x

Post by bang » Wed Mar 15, 2017 5:49 pm

Hi,
You can download it from the following post:
viewtopic.php?f=27&t=18263
Top
gemini0090
Posts: 3
Joined: Tue Jan 24, 2017 5:42 am

Re: firmware 3d touch sensor for i3 pro x

Post by gemini0090 » Sun Mar 19, 2017 5:22 am

thank you very much!!!
Top
rishabhj2019
Posts: 3
Joined: Wed Mar 15, 2017 6:45 pm

Re: firmware 3d touch sensor for i3 pro x

Post by rishabhj2019 » Wed Mar 22, 2017 2:37 pm

thanks for the firmware links actually I also buy a printer and don't find the firmware links.
Top
Post Reply

Return to “Feedback&Suggestion”