extruder number two extrude less than extruder # 1

Marc71 · Post by **Marc71** » Sat Mar 18, 2017 9:02 pm

Hello

I have calibrated the extraction length correctly for one extruder but the second one extrude less. is there another setting on top of that.
here is my setting #define DEFAULT_AXIS_STEPS_PER_UNIT {78.74,78.74,2560,107.95}

thank you

Post by **William** » Tue Mar 21, 2017 4:34 pm

you can set the extrusion speed in the printer setting.

Geeetech

extruder number two extrude less than extruder # 1

extruder number two extrude less than extruder # 1

Re: extruder number two extrude less than extruder # 1