Extruder heating up then cooling down

Post Reply
Cup
Posts: 123
Joined: Fri Jul 15, 2016 6:11 pm

Re: Extruder heating up then cooling down

Post by Cup » Wed Dec 28, 2016 11:34 am

Hi,@dukeatlan
I guess it's because the thermistor cable of your extruder didn't have a contact with the heating block.
You'd better tight up the cable.
Top
Niallbg
Posts: 11
Joined: Thu Dec 22, 2016 4:35 am

Re: Extruder heating up then cooling down

Post by Niallbg » Tue Jan 10, 2017 8:08 pm

The heating element failed after 3 prints and i have had to buy a replacement one.
Top
Cup
Posts: 123
Joined: Fri Jul 15, 2016 6:11 pm

Re: Extruder heating up then cooling down

Post by Cup » Wed Jan 11, 2017 9:35 am

Sorry to heat that :shock:
Top
crispbestow.90@gmail.com
Posts: 1
Joined: Tue Jul 17, 2018 7:02 pm
Location: Mississauga, ON
Contact:
Contact crispbestow.90@gmail.com

Re: Extruder heating up then cooling down

Post by crispbestow.90@gmail.com » Tue Jul 17, 2018 7:14 pm

This is one of the most often issue of extruders. But it can be resolved.
Top
Post Reply

Return to “Extruder”