Hi guys!
After a few days under testing this printer here are my impressions (dat joke...)
The packet came in a few days and was perfectly packet, as you can see on the photos, the printer comes perfectly protected.
Once i had unboxed the printer I was surprise because it has a very clean desing , in my opinion its beautiful compared to other printers, its very easy to clean too, after print something, you just need to clean the bed and its all done, in other printers you have a lot of cables in the middle.
To do the first print I just needed to assure the bed was calibrated (always do this, it can come descalibrate due to transport) charge the 3D model on repetier and print, its very easy and you need no knowledge to start.
The external dimensions of the printer aren't very big, you can put the printer in almost every table, as you can see on the photos it has similar dimensions as my 15" Laptop.
One thing I love of this printed is that you can print from the SD card, no computer needed, in case you need to print a model that can take 10 or more hours to finish you can put the model on the printer and need no laptop, this is especially useful since windows likes to reboot for updates if nobody is watching.
With the printer came various accesorios to start:
-A mount for Filament (can hold two filaments of 1KG)
-USB cable type B
-A few meters of Blue PLA to test
-Tape for bed, and another already in the bed
-Tools for mounting the filament mount (2 min)
I have test the printer with:
-Geeteech started filament
-Black Formfutura PLA
-White ESUN HIPS
I had no problems with all this filaments, for a newbie like me it cant be better, just choose the correct temperatures of each filament on the repetier and print the 3D model.
I recorded a video printing a Bag Clip for the kitchen, as you can see the clip is fully working, I attach here the link of the 3D model in case you want to test it.
http://www.thingiverse.com/thing:330151
