Pursa I3 pro x dual extruder problem.

Post Reply
jortner
Posts: 11
Joined: Mon Feb 22, 2016 8:25 pm

Pursa I3 pro x dual extruder problem.

Post by jortner » Mon Dec 19, 2016 10:15 am

Hello all,
I have a pursa i3 pro x. I recently installed a second mk 8 extruder. I uploaded the firmware for the pro x dual extruder. The problem im having is that second extruder motor is not working. The hot end heats up just fine. Not sure what to do at this point. Any help would great!

Thanks
Top
Cup
Posts: 123
Joined: Fri Jul 15, 2016 6:11 pm

Re: Pursa I3 pro x dual extruder problem.

Post by Cup » Mon Dec 19, 2016 10:35 am

You can check something in this post:
http://www.geeetech.com/forum/viewtopic ... 17&t=17038
Top
Post Reply

Return to “Extruder”