Its a prusa i3 pro c. 0.1mm Layer 15mm speed. 195 C PLA with 55C bed.
- square.jpg (115.23 KiB) Viewed 7663 times
Objects with ripple/groove
Objects with ripple/groove
Hi guys, i have a little quality problem. Can everbody tell me which problem I have? I want better walls with no ripple.
Its a prusa i3 pro c. 0.1mm Layer 15mm speed. 195 C PLA with 55C bed. Thx
Its a prusa i3 pro c. 0.1mm Layer 15mm speed. 195 C PLA with 55C bed. Thx
-
TheFlyingDutchman
- Posts: 9
- Joined: Thu Jul 02, 2015 4:50 pm
Re: Objects with ripple/groove
The problem does come from the Z axis. Try aligning it better, or try a Z-Axis fix, you'll find them on thingiverse.
Re: Objects with ripple/groove
Check this:
http://www.thingiverse.com/thing:1424358
http://www.thingiverse.com/thing:1424358
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!