Z Axis moves 1/4 of asked

Post Reply
Outsane
Posts: 3
Joined: Wed Nov 02, 2016 6:25 am

Z Axis moves 1/4 of asked

Post by Outsane » Wed Nov 02, 2016 6:57 am

GT2650/ I3 Pro B

When tell the z to move up or down 100mm I get a little less then 25mm.

I checked the voltage of the motor driver and is at 1 volt ...

M8 Rod as supplied, and the z steps/mm is 2650

Movement is smooth and does not seems to have an issue, also the coupling is not slipping.

Thanks
Top
Post Reply

Return to “Stepper Motor”