3D Touch Sensor:Auto-levelling for Geeetech 3D printer

[JohnQuix]

I would really like to hook my 3DTouch to my MeCreator 2. Does anybody know how to wire it correctly? Also has anyone found a good way to mount it?

[Jumpbase]

I've made a holder for the left side of the extruder, i can upload it when i'm at home

[JohnQuix]

Awesome thanks!

[Jumpbase]

It's not perfect but it works
http://www.thingiverse.com/thing:1846793

[baxbax]

@Marco
So you mean the Sensor works fine during the calibration but the nozzle is not in the right position when printing?
If you do,decrease the value "-1.4" in the following codes:
CODE: SELECT ALL
#define Z_PROBE_OFFSET_FROM_EXTRUDER -1.4

You can decrease it to "-1.9" first to see if it makes a difference.

I think, that something did go wrong. Now when I switch on the 3D printer, the 3DTouch sensor, starts up and down, but after blinks.

[William]

@Marco
So you mean the Sensor works fine during the calibration but the nozzle is not in the right position when printing?
If you do,decrease the value "-1.4" in the following codes:
CODE: SELECT ALL
#define Z_PROBE_OFFSET_FROM_EXTRUDER -1.4

You can decrease it to "-1.9" first to see if it makes a difference.

I think, that something did go wrong. Now when I switch on the 3D printer, the 3DTouch sensor, starts up and down, but after blinks.

Maybe you can have a try on what i told @elfag.blogg.no before.

[William]

It's not perfect but it works
http://www.thingiverse.com/thing:1846793

Nice work,how did it perform?

[baxbax]

@Marco
So you mean the Sensor works fine during the calibration but the nozzle is not in the right position when printing?
If you do,decrease the value "-1.4" in the following codes:
CODE: SELECT ALL
#define Z_PROBE_OFFSET_FROM_EXTRUDER -1.4

You can decrease it to "-1.9" first to see if it makes a difference.

I think, that something did go wrong. Now when I switch on the 3D printer, the 3DTouch sensor, starts up and down, but after blinks.

Maybe you can have a try on what i told @elfag.blogg.no before.

Thanks. I will try. I hope , it is the same thing.

[William]

You can have a try first.
Attach a video about your issue please if it doesn't fix it.
Good Luck

[JohnQuix]

@Jumpbase

Do you use this in conjunction with http://www.thingiverse.com/thing:1838009 ?