I know this topic has probably been done to death on here before. I have the GeeTech Illuminium i3 and when I start up a print I believe it is my x-axis home is reversed and my actual prints - if they are detailed IE - a box for Raspberry PI 3 eveything is reversed. I have looked for the aurduno update - cant seem to find it - Love my printer but this is getting quite frustrating - any directional help will be appreciated.
Cheers
Ian
Printing is mirrored
Re: Printing is mirrored
Hi,IanWhatever wrote:I know this topic has probably been done to death on here before. I have the GeeTech Illuminium i3 and when I start up a print I believe it is my x-axis home is reversed and my actual prints - if they are detailed IE - a box for Raspberry PI 3 eveything is reversed. I have looked for the aurduno update - cant seem to find it - Love my printer but this is getting quite frustrating - any directional help will be appreciated.
Cheers
Ian
You mean your X motor had a wrong direction?Here you can modify the direction:
http://www.geeetech.com/forum/viewtopic ... 17&t=17037
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Printing is mirrored
William Kwok wrote:Hi,IanWhatever wrote:I know this topic has probably been done to death on here before. I have the GeeTech Illuminium i3 and when I start up a print I believe it is my x-axis home is reversed and my actual prints - if they are detailed IE - a box for Raspberry PI 3 eveything is reversed. I have looked for the aurduno update - cant seem to find it - Love my printer but this is getting quite frustrating - any directional help will be appreciated.
Cheers
Ian
You mean your X motor had a wrong direction?Here you can modify the direction:
http://www.geeetech.com/forum/viewtopic ... 17&t=17037
Hi quick update my main control board is Sanguinoioiu +4a4988 I have tried to find the firmware to upload to printer with no luck - I am running the latest ardino have tried all the firmwares for i3 Illuminum on suggested link, still not uploading - thanks for any help.
Re: Printing is mirrored
Hi,Whatever wrote:William Kwok wrote:Hi,IanWhatever wrote:I know this topic has probably been done to death on here before. I have the GeeTech Illuminium i3 and when I start up a print I believe it is my x-axis home is reversed and my actual prints - if they are detailed IE - a box for Raspberry PI 3 eveything is reversed. I have looked for the aurduno update - cant seem to find it - Love my printer but this is getting quite frustrating - any directional help will be appreciated.
Cheers
Ian
You mean your X motor had a wrong direction?Here you can modify the direction:
http://www.geeetech.com/forum/viewtopic ... 17&t=17037
Hi quick update my main control board is Sanguinoioiu +4a4988 I have tried to find the firmware to upload to printer with no luck - I am running the latest ardino have tried all the firmwares for i3 Illuminum on suggested link, still not uploading - thanks for any help.
There are too many unexpected errors in the lastest Arduino IDE,you can try an earlier version like 1.0.1,download it from here:
http://www.geeetech.com/wiki/index.php/ ... _Resources
-Keep your mind and try to test it.
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!