For people who wants STL files of parts

chase · Post by **chase** » Fri Jul 22, 2016 9:30 pm

The "8mm" refers to the acrylic frame thickness. I guess there was a another acrylic frame that was made from thinner material.

That's how it was listed on the Geeetech site.
At least a couple weeks ago it was. All the new 2016 models are on the site now.

And wouldn't you know the new Pro B was listed on site less than a week after I bought/received mine. (I didn't buy direct) Hence I'm looking at the all metal upgrade kit to add onto mine to bring it up to date.

Anyway...

chase · Post by **chase** » Sun Jul 24, 2016 3:03 am

Never mind, I found the ones for the i3 Pro B over at Thingiverse. This way I can print out what I need until the all metal upgrade for it arrives.

websmr · Post by **websmr** » Wed Sep 14, 2016 1:34 am

Hi!

I just bought a Geeetech I3 Acrylic pro B

where can i get the stl? I would like to save a copy just in case.

thanks!

Post by **William** » Wed Sep 14, 2016 9:47 am

Hi,
Here it is:

I3 B STL.zip: (1.84 MiB) Downloaded 1357 times

daveapplemotors · Post by **daveapplemotors** » Sat Sep 17, 2016 7:14 pm

Please send me files for the X belt gripper for my Geeetech Prusa i3 pro Aluminum printer.

My X belt gripper fails. The belt comes out but I am using CA glue to keep the it in place for now. I want to print a new gripper with ABS. Will ABS be better than PLA if the temperature is 40-45 degrees?

thank you very much,
Dave Dutton

Post by **William** » Sun Sep 18, 2016 8:53 am

Hi,Dave
Are you finding this part?
http://www.thingiverse.com/thing:1531712
http://www.thingiverse.com/thing:1724855

websmr · Post by **websmr** » Sun Sep 18, 2016 6:22 pm

Thanks Willian!

azzraell · Post by **azzraell** » Tue Oct 25, 2016 2:47 am

thanks for the parts .stl file! should this parts be printed with 100% infill? thanks!

Post by **William** » Tue Oct 25, 2016 11:36 am

Infilling 100% should be stabler.

KiloVolT · Post by **KiloVolT** » Wed Jan 18, 2017 9:56 pm

Hello!
Can anyone post a link to MeCreator2 plastic parts stl?
My printer came broken and i want to order printnig because it faster then wait for replacement parts from seller.

Geeetech

For people who wants STL files of parts

Re: For people who wants STL files of parts

Re: For people who wants STL files of parts

Re: For people who wants STL files of parts

Re: For people who wants STL files of parts

Re: For people who wants STL files of parts

Re: For people who wants STL files of parts

Re: For people who wants STL files of parts

Re: For people who wants STL files of parts

Re: For people who wants STL files of parts

Re: For people who wants STL files of parts