M201 GTX32 Ver1.0.3 does not support M110

Post Reply
elocm
Posts: 17
Joined: Tue Feb 16, 2016 9:13 pm

M201 GTX32 Ver1.0.3 does not support M110

Post by elocm » Tue Feb 16, 2016 11:12 pm

M110 is required to set the internal line number back to zero to continue with a print without the need for resetting the whole printer. This command does not work.

e.g.

M110 N1
Top
Post Reply

Return to “Firmware”